Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Tallboy Knockdown
23
Separating the Cooking Chamber and Firebox
All panels and subassemblies of the Caldera Del Fuego
Tallboy are held together by stainless steel carriage
bolts and machined brass thumbnuts. The square shank
of each carriage bolt mates with a square hole in the
Tallboy. The thumbnuts are knurled to ease hand
tightening. The nuts never need to be fitted more than
hand tight, so no tools are required to break down or
assemble the cooker.
The first time you break your Tallboy down; you may need to use pliers to loosen the thumbnuts.
Use a rubber jar-lid opening pad between the thumbnut and the pliers to avoid marring the nut.
The Cooking Chamber is secured to the
Firebox Housing by four mating carriage
bolts and thumbnuts. To break your
cooker into two pieces for easy transport:
• Unscrew two nuts joining the Cooking
Chamber to the Firebox Housing on
each side of the cooker.
• Lift the Cooking Chamber off of the
Firebox Housing.
Store the four nuts and bolts in a zip-top
plastic bag for reassembly.
Always empty the Firebox before transporting your cooker.
Caution: If you are going to transport charcoal that you have “put out” you must put it in a
covered and sealed metal container other than the Firebox , even though it may be wet.