Weber Main Gas Line Grill Accessory User Manual


  Open as PDF
of 8
 
WARNING: Do not use a wrench
to loosen the connection. Using
a wrench could damage the
regulator coupling and could
cause a leak.
4
3
1
2
3
4 6
7 8
9 10
11
12
5
1
DIScONNEctION OF HOSE FROM GAS SOURcE
See Owner’s Guide for complete gas connection and removal instructions.
EXPORT GRills
LP UNITS:
A) Make sure gas supply is turned off at source.
B) Disconnect LP cylinder from inside of cabinet base.
C) Remove LP cylinder from cabinet base.
NG UNITS:
A) Make sure gas supply is turned off at source.
B) Slide collar of quick-disconnect back to remove
flexible gas supply hose from gas source.
LPG UNITS:
WARNING: Make sure that the LPG cylinder or regulator valve is
closed.
A) Remove the gas supply cylinder by shutting off the gas supply and disconnecting
the hose and regulator assembly from the cylinder.
Identify your regulator type. Follow the disconnection instructions for that regulator.
Disconnect by Turning Anti-Clockwise
Unscrew regulator from cylinder by turning fitting anti-clockwise (1).
Disconnect by Turning Clockwise
Unscrew regulator from cylinder by turning fitting clockwise (2) (3).
Disconnect by Turning Lever
Turn regulator lever to the down/off position (4). Push in on regulator lever (5) until
it releases from the cylinder (6).
Disconnect by Sliding Collar
Make sure regulator lever is in the off position (7)(9). Slide the collar of the
regulator up (8)(10) to disconnect from the cylinder.
B) Remove LPG cylinder.
NG UNITS:
A) Make sure gas supply is turned off at source.
Manual Shut-Off Valve
B) Disconnect flexible gas supply hose from manual shut-off valve (11). Refer
to instructions included with your flexible gas supply hose.
— OR —
Gas Outlet Valve
B) Disconnect flexible gas supply hose from gas outlet valve (12). Pull plug out
to disengage hose from cover plate. (This automatically shuts off gas.) Refer
to instructions included with your flexible gas supply hose.
NORTH AMERiCAN GRills
 previous next