Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
12
Figure 4
Step 4
Continue frame assembly
You will need: frame assembly, front panel, four 1/2
inch bolts, four nylon washers, 7/16 inch wrench.
Place front panel along inside edge of frame assembly
with Weber logo on the side closest to the wheel
frame and facing out. Slip washers on bolts, insert
bolts through the front panel and screw into the frame
assembly. Figure 4.
Add the remaining bolts and washers and tighten.
Figure 5
Step 5
Complete frame assembly
You will need: two bottom connectors, four 1 3/4 inch
bolts, four nylon washers, 7/16 inch wrench.
Turn over partial frame assembly.
Place washer on bolt, insert through frame, and screw
into bottom connector. Do not fully tighten bolts until
both bottom connectors are in place. Place washer
on second bolt and insert through frame into opposite
end of bottom connector. Figure 5.
Hold the other bottom connector between wheel and leg
frame. Add washers to bolts. Insert bolts through frame
and screw into bottom connector. Figure 5. Tighten all
four bolts.
Bottom connector
Weber nameplate facing out