Weber 5000 Series Gas Grill User Manual


 
7
Assembly
Tools needed
Screwdrivers, regular
and Phillips
Hammer
7/16, 5/8, 11/16 and 3/4 inch open-end or
two adjustable wrenches
Pliers
Block of wood
Supplies needed
Your LP tank is shipped empty for safety. After setting
the LP fuel scale you will need to fill it. (See Step "Fill LP
tank").
You will need a soap and water solution to check for gas
leaks. (See Step “Check for gas leaks”).
Note - The hardware size of nuts, bolts and screws is
given. For example "1/4-20 x 2 inch bolt" means a bolt
1/4 inch in diameter with 20 threads to the inch, 2 inches
long. On a small screw for example, "6-32 x 1/2 inch
screw" means a number 6 screw, with 32 threads to the
inch, 1/2 inch long.
Step 1
Check package contents
Cooking box
(assembly)
Lid
(assembly)
LP tank
LP tank filler adapter
Bottom tray
Front panel
Two accessory trays
Control panel
®
®
®
®
®
®
®
®
While we give much attention to our products,
unfortunately an occasional error may occur.
If a part is missing, do not go back to the store.
Call the Weber Customer Service Center toll free
1-800-446-1071 to receive immediate assistance.
Have your owner’s manual and serial number of the
barbecue available for reference.