Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
Step 4
Install Three Legs
You will need: three legs, bottom, six machine screws,
twelve large fiber washers, nine steel washers, six hex nuts,
a regular screwdriver and wrench.
Install only three legs as shown in Figure 3. Note that the
machine screws are not installed in the same direction.
CAUTION: Do not overtighten; you may crack the
porcelain finish.
Hex nut
Steel washer
Steel washer
Steel washer
Large fiber
washer
Machine screw
Machine screw
Large fiber
washer
Hex nut
Figure 3
Step 3
Install Wood Handles
You will need: lid assembly, two top wood handles, two
bottom wood handles, two wood screws and a Phillips
screwdriver.
Install handles as shown in Figure 2.
®
®
Wood screw
Top wood handle
Bottom wood handle
Figure 2
Step 5
Install Heat Deflector and Fourth Leg
You will need: heat deflector, bottom assembly, one leg,
two machine screws, four large fiber washers, three steel
washers, two hex nuts, a regular screwdriver and wrench.
Insert the heat deflector between the three legs and
position it so it rests on all the leg tabs, as shown in Figure
4.
Now install the fourth leg using the procedure shown in
Figure 3, and making sure the heat deflector rests on all
leg tabs.
Heat deflector
Leg tab
Figure 4