Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
12
MAINTENANCE
12. Lift and twist the burner assembly slightly to separate
the crossover tube from the burners. Remove the
burners from the cooking box. Figure 13.
Figure 13
Separate here
Crossover tube
13. To reinstall the burners, reverse steps 3 through 12.
ƽCAUTION:The burner openings must be positioned
properly over the valve orifices. Figure 14 (a).
Check proper assembly before fastening manifold in
place. Figure 14 (b).
Figure 14
(a)
(b)
Valve
Burner
Crossover Ignition System Operations
If the Crossover Ignition System fails to ignite the Left
burner, light the Left burner with a match. If the Left
burner lights with a match, then check the Crossover
Ignition System.
■ Check that both the white and black ignition wires are
attached properly. Figure 15.
■ Check that the Crossover Ignition button pushes the
igniter (button) down, and returns to the up position.
■ Check to see if the igniter is loose in the frame.
Tighten if necessary; See Step “Install igniter” for
correct procedure.
If the Crossover Ignition System still fails to light, contact
Weber-Stephen Customer Service.
Figure 15
White wire
Black wire