Weber 89557 Gas Grill User Manual


 
WWW.WEBER.COM
®
13
MAIN BURNER LIGHTING
1) Open the lid.
2) Make sure all burner control knobs are turned OFF. (Push control knob down and
turn clockwise to ensure that it is in the OFF position.)
3) Turn the gas supply valve on.
ƽ WARNING: Do not lean over the open barbecue. Keep your
face and body at least one foot away from the matchlight
hole when lighting the barbecue.
4) Push BURNER 1 control knob down and turn to START/HI.
5) Push and hold the electronic ignition button. You will hear it sparking.
6) Check that the burner is lit by looking through the matchlight hole on the front of
the cooking box. You should see a flame.
ƽ WARNING: If the burner does not light in five (5) seconds,
turn the Burner 1 control knob to OFF and wait 5 minutes
to let the gas clear before you try again or try to light with a
match.
7) After BURNER 1 is lit you can turn on BURNER 2 and BURNER 3.
Note - Always light BURNER 1 first. The other burners ignite from BURNER 1.
TO EXTINGUISH
Push down and turn each burner control knob clockwise to the OFF position. Turn gas
supply OFF at the source.
OPERATING INSTRUCTIONS
* The grill illustrated may have
slight differences than the
model purchased.
MAIN BURNER LIGHTING
* The grill illustrated may have
slight differences than the
model purchased.
MAIN BURNER MANUAL LIGHTING
ƽ DANGER
Failure to open the lid while igniting the barbecue’s burners,
or not waiting 5 minutes to allow the gas to clear if the
barbecue does not light, may result in an explosive flame-up
which can cause serious bodily injury or death.
MAIN BURNER MANUAL LIGHTING
1) Open the lid.
2) Make sure all burner control knobs are turned OFF. (Push each knob down and
turn clockwise to ensure they are in the OFF position.)
3) Turn the gas supply valve on.
4) Insert match holder with lit match into the matchlight hole in the front of the
cooking box.
ƽ WARNING: Do not lean over open barbecue. Keep your face
and body at least one foot away from the matchlight hole
when lighting the barbecue.
5) Push BURNER 1 control knob down and turn to START/HI.
6) Check that the burner is lit by looking through the matchlight hole on the front of
the cooking box. You should see a flame.
ƽ WARNING: If the burner does not light in five seconds, turn
the Burner 1 control knob to OFF and wait 5 minutes to let
the gas clear before you try again.
7) After BURNER 1 is lit you can turn on BURNER 2 and BURNER 3.
Note - Always light BURNER 1 first. The other burners ignite from BURNER 1.
TO EXTINGUISH
Push down and turn each burner control knob clockwise to the OFF position. Turn gas
supply OFF at the source.
1
O
F
F
A
R
R
E
T
E
/
A
P
A
G
A
D
O
2
5