Weber 625 Gas Grill User Manual


 
12
INSTALL TOOL HOLDERS
Figure 20
a)
You will need: four tool holders.
Place the tool holder under the control panel and over the
front panel. Figure 20 (a). Set the tool holder on top of the
front panel and slide it to the left.
Control panel
Front panel
REINSTALL CONTROL
PANEL
You will need: control panel.
Pull igniter buttons up until they stay in the up position.
Place the control panel into the grooves on either side of
the front of the cooking box. Push the control panel into
place, using even pressure while pushing. Figure 20 (a).
Use your fingers to lift the front edge of the control panel
slightly and set it into the recess on both sides of the
cooking box. Figure 21.
Figure 21
(a)
Front Panel
Control Panel