Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
WARNING: Do not use a wrench to
tighten connection. Using a wrench
could damage regulator coupling
and could cause a leak.
3
4
3
4
6
7
8
9
10
11
12
13
14
1
2
5
8
cONNEctION OF HOSE tO GAS SOURcE
See Owner’s Guide for complete gas connection and removal instructions.
EXPORT GRills
LP UNITS:
A) Reinstall LP cylinder into cabinet base.
B) Screw regulator coupling onto cylinder valve;
turn clockwise, or to the right.
NG UNITS:
A) Slide collar of quick-disconnect back and reconnect
flexible gas supply hose.
LPG UNITS:
WARNING: Make sure that the LPG cylinder or regulator valve
is closed.
A) Connect regulator to LPG cylinder.
Some regulators push ON to connect and pull OFF to disconnect; others
have a nut with a left-hand thread that connects to the cylinder valve.
Identify your regulator type and follow one of the connection instructions
specific to that regulator.
Connect by Turning Clockwise
Screw regulator onto cylinder by turning fitting clockwise (1). Position the
regulator so that the vent hole (2) faces down.
Connect by Turning Anti-Clockwise
Screw regulator onto cylinder by turning fitting anti-clockwise (3) (4).
Connect by Pushing Lever/Snapping into Position
Turn regulator lever (5) to the down/off position. Push regulator down on
cylinder valve until regulator snaps into position (6).
Connect by Sliding Collar
Make sure regulator lever is in the off position (7)(10). Slide the collar of
the regulator up (8)(11). Push the regulator down onto the cylinder valve
and maintain pressure. Slide collar down to close (9)(12). If regulator does
not lock, repeat procedure.
NG UNITS:
A) Make sure gas supply is turned off at source.
Manual Shut-Off Valve
B) Connect flexible gas supply hose to manual shut-off valve (13). Refer to
instructions included with your flexible gas supply hose.
— OR —
Gas Outlet Valve
B) Connect flexible gas supply hose to gas outlet valve (14). Insert plug into
circular receptacle on cover plate, slide plug upward, and push plug in to
engage. Refer to instructions included with your flexible gas supply hose.
NORTH AMERiCAN GRills
WARNING: Make sure all control knobs are turned to the OFF position before reconnecting gas supply and
operating grill. Your actions, if you fail to follow this Product Warning, may cause a fire, an explosion, or structural
failure resulting in serious personal injury or death as well as damage to property.