Weber 55024 Gas Grill User Manual


  Open as PDF
of 26
 
C-4
Reinstall control panel (after checking for gas
leaks)
(1) Set the control panel in place over both sides of
the frame. Hold the crossover ignition button up
while setting the control panel in place.
(2) Line up the control panel with the white plastic
plugs in the frame brace. Insert screws and tighten
with a Phillips screwdriver until snug. Do not
overtighten.
(3) Push each of the burner control knobs onto their
valve.
Check:
1) Hose to manifold connection
2) Manifold to side burner hose connection
ƽ WARNING: If there is a leak at connection(1),
retighten the fitting with a wrench and recheck for
leaks with soap and water solution.
If a leak persists after retightening the fitting, turn
OFF the gas. DO NOT OPERATE THE BARBECUE.
Contact the Customer Service Representative in
your region using the contact information sheet
provided with your manual.
3) Side burner hose to side burner connection
4) Valves to manifold connections
5) Hose to quick disconnect connection
ƽ WARNING: If there is a leak at
connections(2),(3),(4) or(5), turn OFF the gas. DO
NOT OPERATE THE BARBECUE. Contact the
Customer Service Representative in your region
using the contact information sheet provided with
your manual.
When leak checks are complete, turn gas supply OFF
at the source and rinse connections with water.
(1)
(2)
(3)
(4)
(5)
(4) Reinstall Side Burner cover.
 previous next