Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Buy Weber Grill Parts. It couldn't be easier. Find your Weber parts here.
1
Assembly Instructions
Install manifold bracket
You will need: manifold bracket
Hook the bracket(2) onto the manifold at the center
burner valve. Place your hand underneath the bracket.
Lift the manifold and cooking box slightly, then hook the
tab of the bracket on the frame brace(1).
(1)
(2)
Addendum Sheet
* See Section B *
Operating
* See Section D *
General Maintenance
Weber Spider Stopper™ Guards
Your Weber Gas Barbecue, as well as any outdoor gas
appliance, is a target for spiders and other insects. They
can nest in the venturi section (Venturi(1), air shutter(2),
venturi fin(3) ) of the burner tubes. This blocks the
normal gas flow, and can cause the gas to flow back out
of the air shutter. This could result in a fire in and around
the air shutters, under the control panel, causing serious
damage to your barbecue.
(1)
The Weber Spider Stopper™ Guard(1) is factory installed.
It fits tightly around the air shutter section of the burner
tube and the valve, thereby preventing spiders and other
insects access to the burner tubes through the air shutter
openings.
You may have a different style manifold bracket and Spider Stopper Guard listed in your
instruction manual. If you do, please follow these steps below in place of the steps
included in the manual.
We recommend that you inspect the Weber Spider
Stopper Guards at least once a year. (See Section
“Annual Maintenance”.) Also inspect and clean the
Spider Stopper Guards if any of the following
symptoms should ever occur:
Manifold Support Bracket - 1
* See Section A *
ADD US 09/30/00