Weber 475 Grill Accessory User Manual


 
5. Assembly of Meat Clamp
Insert both Thumb Screws into the holes on the Lock
Arm. NOTE: Do not tighten Thumb Screws fully.
Insert middle Meat Clamp Arm into top of the Lock Arm
as shown. Tighten top Thumb Screw to lock Meat Clamp
into shaft.
Repeat all of step 5 for remaining Meat Clamps.
Lock
Arm
Screw
Holes
Thumb
Screw
Middle
Meat
Clamp
Arm
Top of
Lock Arm
1. Wash All Components Before Assembly
2. Install the Motor Bracket
Attach the stainless steel Motor Bracket to the left side of
the Cooking Box, using the 1/4 x 20 x 5/8fasteners and
the 1/4-20 Keps nuts.
3. Attach the Motor
Slide the Motor onto the stainless steel Motor Bracket.
4. Attach Rotisserie Shaft to the Rottisserie
Basket
Screw Handle Shaft and Handle together.
Screw Rotisserie Shaft to Rotisserie Basket and tighten
shaft with adjustable wrench. Screw Handle
Shaft/Handle to Rotisserie Basket. NOTE: All threads
are counter-clockwise, or tighten to the left.
Rotisserie
Shaft
Handle Shaft
Rotisserie
Basket
Handle
Tighten
Shaft
Here
Assemb
ly Instructions
6. Attach Meat Clamps to Rotisserie Basket
Face prongs of Meat Clamp toward the inside of the
Rotisserie Basket. Slide bottom of Lock Arm onto
tapered portion of the rail of Rotisserie Basket. Slide
Lock Arm along rail to desired position. Tighten Thumb
Screw at bottom of Lock Arm to fix its position on
Rotisserie Basket.
Tapered
Rail
Bottom of
Lock Arm