Vulcan-Hart ML-114634 Charcoal Grill User Manual


 
— 9 —
RED
BUTTON
PILOT SHUTOFF VALVE
PILOT
ADJUSTMENT
SCREW
PL-52719
TURNING THE CHARBROILER ON
All burners are lit from constantly burning pilots. Turn gas valve control knobs to HI to ignite the
burners.
TURNING THE CHARBROILER OFF
Turn gas valve control knobs to OFF.
Extended Shutdown
Turn gas valve control knobs to OFF. Turn the manual shutoff valve to OFF. Shut off the pilot flame
by removing the pilot adjustment cap and turning the adjusting screw on the pilot shutoff valve (Fig. 3).
USING THE CHARBROILER
To preheat, turn gas valve control knobs to highest setting about 25-30 minutes before cooking time.
After this period of preheat, grid temperatures will be in the range of 600°F for best broiling results.
Then adjust the control knobs to a lower position to maintain the grid temperature between 575°F and
625°F.
Do not leave the burners on with knobs in the HI position for any extended period of time beyond the
recommended preheat time or "burn-off" time (see CLEANING in this manual).
To minimize gas usage, operate only those burners needed for the cooking load.
GREASE PAN
Grease in the grease pan will not get hot enough to be ignited by the burners; however, under some
use conditions, flaming particles may drop into the grease drawer and cause it to ignite. Only if your
use conditions warrant, add a
1
/16" deep layer of water in the grease pan to prevent this from happening.
Fig. 3