Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Congratulations
Congratulations and welcome to the elite world of Viking
ownership. We hope you will enjoy and appreciate the care
and attention we have put into every detail of your new,
state-of-the-art grill.
Your Viking appliance is designed to offer years of reliable
service. This Use and Care Manual will provide you with the
information you need to become familiar with the care and
operation of your grill.
Your complete satisfaction is our ultimate goal. If you have any
questions or comments about this product, please contact the
dealer from whom you purchased it, or contact our Consumer
Support Center at 1-888-VIKING1.
We appreciate your choice of a Viking grill and hope that you
will again select our products for your other major appliance
needs.
For more information about the complete and growing
selection of Viking products, contact your dealer or visit us
online at vikingrange.com.
3
Warnings
WARNING
EXPLOSION HAZARD
Do not use the grill as storage area for
flammable materials. Keep area clear and free
from combustible materials, gasoline, and other
flammable vapors and liquids. Failure to do
so can result in death, explosion, or fire.
WARNING
To reduce the risk of fire, electric shock, or injury, read and
follow these basic precautions before operating your gas grill
or side burners.
WARNING
Before lighting the burners inspect the gas supply piping
or hose. If there is evidence of cuts, wear, or abrasion, it must
be replaced prior to use. Always keep your face and body as
far away from the grill as possible when lighting.
WARNING
ELECTRICAL SHOCK HAZARD
This unit is equipped with a grounding plug
for your protection against shock hazard and
should be plugged directly into a properly
grounded receptacle. Do not cut or remove
the grounding prong from this plug.
Keep all electric cords away from the heated surfaces of
the grill.
WARNING
Do not use flammable cleaning materials. Use a flashlight to
inspect the burner inlet to ensure it is not blocked. If
obstructions can be seen, use a metal wire coat hanger that
has been straightened out. Shake out any debris through the
air shutter.
2