Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Follow these steps to manually light the Main Burners:
1. Turn off all the burners.
2. Wait 5 minutes to allow any accumulated gas to dissipate.
Use a long stem match to manually light:
3. Remove the grill grates.
4. Find the ports on top of the burner by looking
through the opening at the end of the radiant.
Keep your hands and face as far away
from the burner as possible.
5. Place the lighted long-stem match through
the hole in the radiant (see illustration above).
This position is near the burner ports.
6. Turn the knob to the LITE position. The
burner will light within 4 to 10 seconds.
SECTION 3: USING YOUR CHAR GLO
®
BARBECUE
MANUAL LIGHTING INSTRUCTIONS**
– Read Before Lighting –
Follow these steps to manually light the
Smoker:
1. Turn off all the burners.
2. Wait 5 minutes to allow any accumulated gas
to dissipate.
3. Remove the smoker tray.
4. Find the ports on top of the smoker. Keep
your hands and face as far away from the
burner as possible.
5. Place the lighted match through the opening
for the smoker tray and next to the burner
ports.
6. Turn the knob to the LITE position. The
burner will light within 4 to 10 seconds.
** NOTE: The infrared rotisserie burner can-
not be lit manually.
Access Hole for Manual Lighting
Middle section
of radiant
Page 13