Taylor 821 Gas Grill User Manual


 
34
Model 811, 813, 819, 821 SeriesOperating Procedures
130201
Step 32
With a clean, sanitizer-soaked grill cloth, rinse the
bottom of the platen handles, and the front, sides,
and back of the platen surfaces.
Figure 61
Step 33
With a clean, sanitizer-soaked grill cloth, rinse the
platen cook surfaces.
Figure 62
Step 34
Press the STANDBY button twice t o lower one of the
platens.
811 Only: Press the STANDBY but ton twice to lower
the center platen. With a clean, sanitizer-soaked grill
cloth, rinse both sides of the center platen.
Step 35
With a clean, sanitizer-soaked g rill cloth, rinse the
inner edges of the right and left platens.
Step 36
Press the RAISE button to raise the lowered platen.
Step 37
With a clean, sanitizer-soaked g rill cloth, wipe the
exterior of all the platens, especially behind the rear
of the upper platens (next to the arm assembly).
Step 38
Starting at the back of the lower grill, spread the
remaining grill cleaner over the entire surface. Do
not scrub while applying product.
Step 39
Lightly scrub the surface with the non-abrasive pad
until all soil has been liquified by the grill cleaner.
Figure 63
Note: The r ear of the upper platen, as well as the
tubular arm, can easily be wiped from the front of the
unit. If cleaning is performed on a daily basis, there
should be no carbon build-up.