Summit 56214 Gas Grill User Manual


  Open as PDF
of 84
 
WWW.WEbER.com
®
23
PRobLEm cHEcK SoLUTIoN
Side Burner does not light. Is gas supply off?
The excess flow safety device, which is part of the
barbecue to cylinder connection, may have activated.
Turn gas supply on.
To reset the excess flow safety device turn all burner
control knobs and the cylinder valve off. Disconnect the
regulator from the cylinder. Turn burner control knobs to
START/HI. Wait at least one minute. Turn burner control
knobs to OFF. Reconnect the regulator to the cylinder.
Turn cylinder valve on slowly. Refer to “SIDE BURNER
IGNITION”.
Flame is low in HI position. Is the fuel hose bent or kinked? Straighten hose.
Push button ignition does not work. Does burner light with a match? If match lights burner, check igniter. Refer to “SIDE
BURNER MAINTENANCE”.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our
web site. Log onto www.weber.com
®
.
SIDE bURNER TRoUbLESHooTING
GRILL oUT™ HANDLE LIGHT TRoUbLESHooTING
PRobLEm cHEcK SoLUTIoN
Weber Grill Out™ Handle Light does not light. Are the batteries old? Replace batteries.
Are the batteries installed correctly? Refer to assembly illustration.
Is the lid in the up position with the power button ON? Light will activate when lid is open.
Is the Weber
®
Grill Out™ Handle Light activated? Press the power button.
Is the Weber
®
Grill Out™ Handle Light positioned
correctly on the handle?
Adjustposition.Refertoassemblyillustration.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our
web site. Log onto www.weber.com
®
.
 previous next