Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
CLEANING YOUR FIRE
To maintain the high performance and quality
finish of your Baxi Fires Division fire, please
follow these guidelines:
·Before attempting to clean the fire, please
remember to turn off the fire and wait for the
appliance to cool. The fire will retain heat for
some time before cleaning can begin.
·If any pieces of debris are found in the fire
box, have the chimney inspected before
further use.
Metal parts.
·Clean the metal parts with a slightly damp
cloth and then dry.
·Do not use abrasive cleaners as these will
scratch the fire surface.
Window glass.
·Remove any stains on the window with a
non-abrasive cleaner such as a ceramic hob
cleaner. Do not use abrasive cleaners.
·The fire has been designed to so that you
can remove the window without having to call
in a service engineer. This allows you to clean the inside of the window.
To remove the window:
1.
Unscrew and remove the two knurled screws which are under the fascia canopy (See
figure 4).
2. Pull the top of the window surround forward (See figure 4).
3.
Lift the window surround up to clear the slots in the fascia apron (See figure 4). Put
the surround in a safe place.
4.
Remove the window unit by removing the screws each side of the window frame and
lift the window unit clear.
5. After cleaning, replace and secure the window unit using the two screws removed
previously. Replace the surround. Make sure that the outside edges of the window
surround sides are inside the fascia.
Page 9
OWNER GUIDE
© Baxi Heating U.K. Limited 2007.
Figure 4.