Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
The L.P. gas cylinder must have a shut-off
valve terminating in a Type 1 L.P. gas-
cylinder-valve outlet. A Type 1 compatible
cylinder with a Type 1 cylinder valve has a
positive seating connection that does not
permit gas flow until a positive seal has
been obtained.
The cylinder must be arranged for vapor
withdrawal. It must also include a collar to
protect the cylinder valve. A safety-relief
device having direct communication with
the vapor space of cylinder must be pro-
vided. This will expel high-pressure gas if
the cylinder is overfilled or overheated.
All L.P. gas cylinders used with this appli-
ance shall be constructed and marked in
accordance with the specifications for L.P.
gas cylinders of the U.S. Department of
Transportation (DOT) or the National Stan-
dard of Canada, CAN/CSA-B339, Cylin-
ders, Spheres and Tubes for Transporta-
tion of Dangerous Goods; and Commis-
sion, as applicable; and shall be provided
with a listed overfilling-prevention device.
Read labels on the L.P. gas-supply cylin-
der.
DANGER: Do not insert any foreign ob-
jects into the valve outlet. You may dam-
age the back check. A damaged back
check can cause a leak, which could result
in explosion, fire, severe personal injury or
death.
Allow only a qualified L.P. gas dealer to
fill or repair an L.P. gas-supply cylinder.
Inform the gas dealer if it is a new or used
cylinder to be filled. Caution the gas dealer
not to overfill the fuel cylinder.
After filling, have the gas dealer check for
leaks and that the relief valve remains free
to function.
Have the gas dealer weigh the cylinder after
filling to ensure that the cylinder is not over-
filled.
DANGER:
a.) Do not store a spare L.P. gas cylinder
under or near this appliance.
b.) Never fill the gas cylinder beyond 80 per-
cent full.
c.) If the information in (a.) and (b.) is not
followed exactly, a fire causing serious
injury or death may occur.
TRANSPORTING A FULL CYLINDER
WARNING: Handle a full cylinder with care.
Gas is under high pressure.
You should transport only one cylinder at a
time. Transport the cylinder in an upright
and secure manner with the control valve
turned off and the POL dust cap in place.
Do not transport a cylinder in the passenger
compartment of a vehicle.
Do not leave cylinder in direct sunlight or in
a high-heat area such as a closed car trunk.
High-heat areas could cause the relief valve
to vent gas.
Use a cylinder cap on the cylinder-valve out-
let during transport and when the cylinder is
not connected to the grill. Keep cylinder
valve closed when not in use.
7