Nexgrill 720-0600 Gas Grill User Manual


 
3
WARNING
ELECTRICAL GROUNDING INSTRUCTIONS This appliance (rotisserie motor) is equipped with a plug
and should be plugged directly into a properly grounded receptacle. When installed, must be electrically grounded
in accordance with local codes or in the absence of local codes,with the National Electrical Code, ANSI/NFPA 70
or the Canadian Electrical Code, CSA C22.1 DO NOT cut or remove the grounding prong from this plug.
1.To protect against electric shock, do not immerse cord or plugs in water or other liquid.
2.Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off
parts.
3.Do not operate any outdoor cooking gas appliance with a damaged cord, plug, or after the appliance
malfunctions or has been damaged in any manner. Contact the manufacturer for repair.
4.Do not let the cord hang over the edge of a table of touch hot surface.
5.Do not use an outdoor cooking gas appliance for purposes other than intended.
6.When connecting, first connect plug to the outdoor cooking gas appliance then plug appliance into the outlet.
7.Use only a Ground Fault Interrupt (GFI) protected circuit with this outdoor cooking gas appliance.
8.Never remove the grounding plug or use with an adapter of 2 prongs.
9.Use only extension cords with a 3 prong grounding plug, rated for the power of the equipments, and
approved for outdoor use with a W-A marking.
Safety Instruction continued