Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
6
LIGHTING INSTRUCTIONS
Do not use back burner while operating main burner.
The propane cylinder is equipped with an excess flow device. Unless all burners are turned
off prior to turning the cylinder on, only small flames and low heat will be achievable.
LIGHTING PORT
HOLE
(BOTH SIDES)
CENTER
TUBE
BURNER
MAIN
INFRARED
BURNER
Open lid.
Ensuring burner controls are in
the off position, turn on the gas
supply valve.
IGNITER
REAR
BURNER
Side Burner
Lighting
(optional)
Open burner
cover.
Turn side burner
control to high
position.
Main Tube
Burner Lighting
Turn left burner
control to high
position.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
With left burner
operating on high,
turn the centre,
and/or right burner
to high.
Press and hold
igniter button until
lit, or light by
match.
Main Infrared
Burner Lighting
Turn infrared
burner control to
high position.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
Press and hold
igniter button until
lit, or light by
match.
Back Burner
Lighting
Remove warming
rack.
Turn back burner
control to high
position.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
Press and hold
igniter button until
lit, or light by
match.
Turn igniter knob
clockwise
several times, or
light by match.
If ignition is not
immediate, turn
burner control off.
Wait 5 minutes.
RIGHT
TUBE
BURNER
LEFT
TUBE
BURNER