Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Landscape-Style DVS and DVL
Fireplace Installation Specifications
* Heating Capacity will vary with floor plan, insulation,and outside temperature.
**
Efficiency rating is a product of thermal efficiency determined under continuous operation independent of installed system.
1 DVS-Direct Vent Small
Heating Capacity:*
Up to1,500 Sq. Ft.
Maximum Btu/Hour Input:**
31,000 (NG/LP)
Minimum Btu/Hour Output:
18,600 (NG) 16,000 (LP)
Steady State Efficiency:** (with blowers on)
80% (NG) 80.5% (LP)
AFUE:
71.3% (NG) 71.8% (LP)
Flue Diameter:
6 5/8”
Powerful Convection Fan:
130 CFM - Included with fireplace
Glass Area:
24 3/4” w x 12 3/4” H - 316” sq. in.
2 DVL-Direct Vent Large
Heating Capacity:*
Up to 2,000 Sq. Ft.
Maximum Btu/Hour Input:**
40,000 (NG/LP)
Minimum Btu/Hour Output:
17,250 (NG), 20,600 (LP)
Steady State Efficiency:** (with blowers on)
82% (NG and LP)
AFUE:
68% (NG and LP)
Flue Diameter:
8”
Powerful Fan:
130 CFM - Included with fireplace
Glass Area:
29” w x 17” H - 493” sq. in.
16
Clearances To Combustibles
A = Face to Mantle 17”*
B = Face to Top Facing 12”*
C = Faceplate to Sidewall 6”
D = Faceplate to Side Facing 6”
E = Hearth Extension 12”
F = Hearth Width 29 7/8” to 33 1/8”**
* Measured from the top of face.
** Face widths vary between designs
1 DVS
2 DVL
A = Face to Mantle* 15” to 26”*
B = Face to Top Facing 12” to 19 1/2”*
C = Faceplate to Sidewall 6”
D = Faceplate to Side Facing 6”
E = Hearth Extension 12”**
F = Hearth Width 32 3/4” to 37 5/8”**
* Measured from the top of face. Varies with mantle depth
** Not required if raised 3”.
B
C
D
A
E
F
A
Please refer to the Owner’s Manual for all installation information. Owner’s Manuals can be
downloaded from the Lopi website under the specific product -- www.lopistoves.com.
2
8
1
/
8
”
28 1/2”
1
9
3
/
8
”
14 1/2”
2” 34 3/4”
3
7
”
40 1/8”
53 5/8”
4
3
7
/
8
”
1 7/8”
7”
2
5
1
/
4
”
2
0
1
/
4
”
5