Kompernass KH 1603 Gas Grill User Manual


 
- 4 -
bifinett KH 1603
Tabletop grill KH 1603
Proper use
The device is intended for grilling foods
that are suitable for grilling.
Only original accessories are to be used –
and used as described. Any other use or
modification shall be deemed improper
use and could give rise to considerable
dangers.
The manufacturer will not accept liabili-
ty for loss or damage arising from im-
proper use. Not suitable for commercial
use.
Technical information
Mains voltage: 230 V ~ 50Hz
Nominal power: 1600 W
ƽ Important safety advice
To avoid danger to life from electric
shock:
Do not operate the device if it has a
damaged mains lead or plug.
If the connection lead or device does
not work perfectly or is damaged,
have it examined and repaired imme-
diately at the service centre.
The service centre for your country is
shown on the guarantee card.
Before bringing into use and each
time after cleaning, check that the
connection contacts on the grill plate
are dry.
Make sure that the mains lead cannot
touch any hot parts. Never use the de-
vice in the vicinity of open flames, a
hotplate or a hot oven.
Do not place the device out in the
rain. Do not use it in a damp or wet
environment. Make sure that the
mains lead never gets wet during
operation.
To avoid a fire hazard and injuries:
Never leave the appliance unattended
during operation.
Never place the appliance underneath
cupboards or near curtains or other si-
milar easily flammable materials and
keep such materials away from the
appliance.
Keep the appliance and the power
cord away from children. Children of-
ten underestimate the danger arising
from electrical appliances.
Danger of burning! Allow the appli-
ance to cool down completely before
cleaning.
Danger of burning! Only use the he-
at-insulated handles. The surfaces of
the appliance become very hot during
operation.
Make sure the appliance is standing
firmly.
Position the appliance near a wall
socket, if possible. Make sure that the
power plug is easily accessible in case
of danger and that no-one can trip
over the power cord.
Protect the non-stick coating by not
using metal tools such as knives, forks
etc. If the non-stick coating is dama-
ged, do not continue to use the appli-
ance.
KH1603_IB_UK.qxd 09.01.2007 14:15 Uhr Seite 4