KitchenAid KBSU487TSS Gas Grill User Manual


 
9
Do not block access to the shutoff valve. The valve is for turning
on or shutting off gas to the grill.
LP Gas Conversion Using a Local LP Gas Supply
Conversion must be made by a qualified person. The installation
of this grill must conform with local codes or, in the absence of
local codes, with either the National Fuel Gas Code, ANSI
Z223.1/NPFA 54, Natural Gas and Propane Installation Code,
CSA B149.1, or Propane Storage and Handling Code, B149.2.
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
LP Gas Conversion Using a 20 lb LP Gas Fuel Tank
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A 20 lb LP gas fuel tank must be purchased separately.
INSTALLATION INSTRUCTIONS
Unpack Grill
Unpack grill. Remove all packaging materials and remove grill
from carton.
Move grill close to desired outdoor location.
Open the hood.
Remove Packaging Material Inside the Grill
1. Cut the tiedowns holding the grates together.
2. Remove rotisserie skewer (on some models), warming shelf
and grill grates from inside the grill and remove packaging
material.
3. Remove foam block and wrap from inside the grill.
4. Replace the grill grates.
5. Place warming shelf on brackets as shown.
A. Gas supply line
B. Shutoff valve “open” position
C. To grill
A
B
C
A. Grill gas pipe
B.New CSA International approved
“outdoor” flexible gas supply line
C. Rear of grill
D.To local LP gas supply
A
B
C
D
Excessive Weight Hazard
Use two or more people to move and install grill.
WARNING
Failure to do so can result in back or other injury.
A. Foam block
B. Foam wrap
A.Warming shelf brackets
B. Warming shelf
A
B
A
B
A