Kenmore 146.1614221 Gas Grill User Manual


 
16198-40700219 • 23
A B
C
F
E
D
Sideburner
Loosen side burner in side shelf. (B ). To loosen, unscrew and remove two front screws holding
sideburner in place. (A). Note: Do not loosen electrode screw.
Remove the 2 pre-installed screws from the valve stem and set them aside. (C)
Insert valve stem through hole in fascia. (D) Attach bezel to fascia and valve face with previously
removed 2 screws.
Attach bezel with black mark facing up (E).
Place sideburner tube over the valve, making sure that valve is inside sideburner tube. (F)
Push control knob onto sideburner valve stem. (G)
Reattach sideburner to sideburner shelf with the 2 previously removed screws. Replace sideburner
grate. (H)
Connect both igniter wires to the igniter module on the inside of the right fascia. To connect, push
igniter wire tips onto pins in igniter module.(I)
Unscrew igniter cap from control panel. Insert (1) AAA battery (provided in blister pack) into battery
slot with positive end (+) facing outward. Screw igniter cap back onto panel. (J)
A B
C
D
E F