Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
5. Using (3) 5/32 x 1/2" screws and (3) 1/2" lock
washers, securely attach side burner shelf to grill
head. Fully tighten two screws from previous step.
Secure side burner control panel to main control
panel with screw removed in step 2. (Fig. 11)
6. Repeat steps 2 through 5 to install side shelf.
Installing Side Burner Valve
1. Remove screws attaching side burner to
underside of side burner shelf to make room to
install side burner valve. See Figure 12 A inset.
2. Remove two screws and washers from side
burner control valve face. Insert side burner valve
control stem through hole in side burner control
panel. See Figure 12 B.
3. Place side burner control knob bezel over side
burner valve control stem. Secure bezel to control
and valve with 2 screws removed in step 2. Push
control knob onto valve control stem. See Figure 13.
4. Insert valve orifice tip into burner tube as shown
in Fig. 12. Reattach burner to underside of side
burner shelf with screws removed in step 1.
5. Plug ignition wire into igniter wire electrode on
underside of burner(Fig. 14).
Figure 12
A
B
Figure 13
I When you have finished assembling grill, make
sure that all screws and nuts are tight and secure.
Installing Battery
1.Unscrew the ignition battery cap. (Found at far left
of control panel).
2.Install battery into ignition box with positive
terminal facing outward.
3.Replace the ignition battery cap after the battery
has been installed. (Fig.15)
Figure 14
3pcs: ¼ X ½"
Figure 11
1pc: ¼ X ½"
1pc: 5/32 X ½"
10
Figure 15
/