Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Maintenance
Burner Adjustment
Fig. 18
Care & Maintenance
Page 20
Fig. 19
Venturi Tube
Valve
Outlet
1/4"
NOTE : It may be necessary to adjust the burners periodically, to
compensate for variables in gas characteristics. If you notice that
the burner flame pattern is irregular (see Figs. 9a, 9b & 9c) it
may be necessary to adjust the air shutter opening at the front of
the venturi tubes. The shutters are accessible under the control
panel at the front of the Grill (see Fig. 18).
Use a screwdriver to loosen the locking screws. Open the shutter
just enough to achieve the desired soft, blue flames. Make
adjustments in small increments and allow the burner to come
up to operating temperature (10 min.) before making further
adjustments.
If burners are removed for cleaning or adjustment, always
confirm that they have been reinstalled correctly over the valve
outlets (see Fig. 19). The valves should extend into the burner
venturis approximately 1/4".
Loosen the
Locking Screw
Turn Shutter
Clockwise
to Open