Hobart HCG2 ML-132001 Charcoal Grill User Manual


 
– 6 –
ELECTRICAL CONNECTIONS
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL
ELECTRICAL CODES.
WARNING: APPLIANCES EQUIPPED WITH A FLEXIBLE ELECTRIC SUPPLY CORD ARE
PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THIS PLUG MUST BE CONNECTED
INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE. IF THE RECEPTACLE IS NOT
THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT REMOVE THE
GROUNDING PRONG FROM THIS PLUG.
NOTE: The grill must be connected to a separate circuit. No other appliances must share the circuit
with the grill. If shared the grill may heat more slowly than expected or blow the fuse.
OPERATION
WARNING: THE GRILL AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING,
CLEANING OR SERVICING THE GRILL.
BEFORE FIRST USE
GRILL PLATES
The grill is shipped with an application of machine oil on the upper and lower grill plates. This oil will
need to be removed prior to the seasoning process (See page 7).
Machine Oil Removal
1. Turn the grill ON (green light will light up) and turn the temperature control knob to 150°F for one
minute.
2. Apply a solution of dishwashing liquid and water and wipe the grill plates with a clean, lint free
cloth. Be careful water does not drip onto the grill components.
LEDOM STLOV STTAWOLIK ESAHP
TIUCRIC
)SPMA(
1GCH 02157.1151
2GCH 0224103
3GCH
0215.1151
0223151