Grizzly GMFP28S Outdoor Fireplace User Manual


  Open as PDF
of 6
 
STEP 3 (GRIZZLY)
Attach HANDLE to BOWL:
NOTE: TUBE LEG (O) should be located
directly behind holes on front of BOWL (L)
First thread a LONG BOLT (C) through
HANDLE (B) and BOWL HANDLE
BRACKET (M), and fasten with a
NUT (F) and a SMALL WASHER (E).
Next, attach HANDLE to BOWL (L) using
two (2) BOLTS (A), SMALL WASHERS (E),
LOCK WASHERS (I) and NUTS (F).
A
B
C
M
E.I.F
L
J
K
X
L
STEP 4 (BOTH MODELS)
Add GRATES and FIRE SCREEN:
Add WOOD GRATE (X), and FIRE SCREEN (J)
or GRILL RACK (K). FIRE SCREEN (J) should fit
securely inside lip of BOWL (L). Make sure to lock
FIRE SCREEN into place with clips.
WARNING: FIRE SCREEN (J) and GRILL RACK (K)
should never be used at same time.
STEP 1 (GRIZZLY):
Leg Assembly
Thread WHEEL SUPPORT AXLE (N)
through opening in WHEEL TUBE LEG (P)
then attach WHEELS (R) to SUPPORT
AXLE (N) with LARGE NUT FOR
WHEELS (Q).
Next, place FEET (Z) on
TUBE LEG (O).
STEP 1 (GRIZZLY CUB):
Leg Assembly
Place FEET (Z) on LOCKING LEGS (Y), then
attach LOCKING LEGS (Y) to BOWL (L).
LOCKING LEGS (Y) should snap into place.
O
Z
P
Q
Q
R
R
N
L
Z
Y
STEP 2 (GRIZZLY):
Attach legs to BOWL
NOTE: Make sure to thread bolts downward
through center holes in BOWL (L) toward ground.
First attach TUBE LEG (O) and
WHEEL TUBE LEG (P) to BOWL (L)
with four (4) BOLTS (S), and fasten with
SMALL WASHERS (E), LOCK WASHERS (I)
and NUTS (F), through outer holes.
Next attach LEGS together with STABILIZER
PLATE (AA). Use two (2) BOLTS (S), SMALL
WASHERS (E), LOCK WASHERS (I) and NUTS (F).
L
O
P
S
S
E.I.F
AA
65
 previous