Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Installation
Outdoor Cooking (enters
Lighting
the Grill
Do not attempt to
light tile grill if tile odor of gas is present.
CAUTION: Keep hands and thce as t_u"away
from tile grill as possible when lighting.
• Open tile lid and remove tile side cooktop
b/irller cover.
• Turn all knobs to "OFF" position,
• Turn gas supply on at the LP tank or shut-off
wdve,
NOTE: When lighting the burner fi)r the first
time (11"after a LP tank change, allow up to 20
seconds to purge air fl'om tile lines.
• Push and turn control knob to "LITE"
position, immediately turn the rotai y igniter
knob next to tile burner knob.
NOTE: Tile spark will produce a snapping
sound. This is normal.
• If tile burner does not light within 4 seconds,
turn knobs to "OFF" and wait 5 minutes t()r
tile gas to dissipate beti)re trying again.
• If tile burner does not light after several
attempts, tile burner can be lit with a match.
• A match stick extension rod is provided on
SOllle Illodels.
TO MATCH LIGHT:
• Insert a match stick DO NOT LIGHT)
securely into tile clip end of tile match stick
extension rod,
• Light tile match stick held on tile end of tile
rod and hold against a burner port towards
the fl'ont,
• Push and turn tile corresponding control
knob to tile LITE position.
• If tile burner does not light after 4 seconds,
turn tile knob OFF. Wait 5 lninutes for any
accumulated gas to dissipate befl)re trying to
light tile burner again.
• All burners may be match lit in tile same
lllanner,
• If tile match light extension rod is not
provided with your model, refer to tile
(hvners Manual ti)r lighting instructions.
12