GE Monogram ZGG36120 Gas Grill User Manual


 
Installation
Outdoor Cooki_g Center,_
Provide
Support
Built4n
hl,stallation
All Outdoor Cooking Centers can be installed
on a cart designed specifically for that model
size. Follow the installation instructions
provided with the carts to install. Proceed to
(;as supply to complete the installation.
(:AUTION: The grill is heavy. 2 people are
required to lift and place tile grill into tile
cart or tile enclosure.
• All models may be installed into a
combustible or non-combustible enclosm'e.
Combustible enclosures require tile use of
an insulated jacket. Insulated jackets are
available as a optional accessory. Order tile
specific type flw yore" model.
Clearalces
• Allow 3" at tile rear t0r lid clearance.
• Allow at least 12" clearance at tile back of tile
grill when exhaust is directed to a window or
a s/irfilce that is diflictflt to clean.
• Allow at least 6" clearance on each side to
anv non-combustible material located above
tile cooking sm_hce for cotmterspace.
Rotisserie models also req tfire 6" clearance
tot placing and handling tile motor and
skewer.
• Allow at least 12" clearance on each side and
rear to combustible vertical materials.
2 7" Models
ZX27TKYSS Trim Kit
This kit is designed for both combustible and
non-combustible ench)sures. Tile trim will
conceal tile gap at tile rear and both sides of
tile opening.
Secm'e trim to tile sides and back with screws
provided.
Place tile grill into tile enclosm'e.
NOTE: This trim kit is not designed to
support tile weight of tile grill. Tile grill must
be supported fl'om tile bottom.
12"Min.to
InstallElectrical Combustibles
Outletfor Rotisserie Clearance
on LeftSide forLid
(6.5AMP Min.)
I/2"
InstallElectrical
Outletfor Rotisserie
on LeftSide 33-3
(6.5AMP Min.)
12"Min.to
Combustibles
Clearance
forLid
35-1/2"
10-1/2"
4x4Opening
pply
Line
Openingfor
AccessDoors
11-1/2"
Opening
forGasSupply
Line
peningfor
AccessDoors
27" wide models:
Installation in a non-combustible enclosure.
In a non-combustible (I//asonry) enclosure,
tile grill drops into tile opening. A deck or
ledge on each side is required for support
fl'om tile bottom.
27" wide models:
Installation in a combustible enclosure.
ZX27JYSS insulated jacket is required
• Tile insulated jacket must be supported from
tile bottom by a solid deck or ledge on each
side beneath the jacket.
Consti uct tile enclosure as shown and place
tile insulated jacket into tile enclosm'e. Place
tile cooking center into the jacket. No
installation hardware is required.
7