GE ZGU122N Gas Grill User Manual


 
19
Installation Instructions
INSTALL BRACKET WITH TRANSFORMER (Built-In Models Only)
• Mount the bracket to the back wall of the
enclosure with 4 screws (not supplied).
• Slide the battery compartment from the top,
straight down, engaging the side slots.
Battery/Fuse
Compartment
Bracket
Side Slots
NOTE: All connectors are polarized to connect correctly.
• Join transformer connectors.
• Join battery connectors.
• Route the power cord through the enclosure to the
electrical outlet.
Battery Connectors
Power Cord
Transformer
Connectors
INSTALL COOKTOP BRACKET WITH BATTERY COMPARTMENT
• Mount the bracket to the back wall of the
enclosure with 4 screws (not supplied).
• Slide the battery compartment from the top,
straight down, engaging the side slots. (If
necessary, the bracket may be factory-
assembled.)
• Join battery connectors.
Battery Connectors
Loop for securing free-standing
grill with a chain (located on
grill chassis bottom near the
back right wheel)
SECURITY LOOP
A stainless steel loop is welded to the bottom of the
free-standing grill chassis near the back right wheel.
To secure the grill, put a chain through the steel
loop and padlock through a stationary, secured
eyelet (chain, padlock and eyelet not provided).