Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
34
ENGLISH
USER INSTRUCTIONS
It is mandatory to have an earth connection as per modes foreseen in the electrical
system safety standards.
• If using a fixed connection, it is necessary to pre-set an omnipolar interruption
device on the appliance power supply line with a contacts distance that is equal
to or greater than 3 mm, located in a position that can be reached easily and is in
proximity of the appliance.
• If using a connection with a plug and socket, verify that they are of the same type.
Avoid using reducers, adaptors or diverters because they may cause
overheating or burns.
IMPORTANT: The manufacturer declines any liability for damages to persons or
property, caused by the non observance of the following regulations or resulting from
tampering with even a single part of the appliance.
14. Cooker hob use
14.1 Lighting the burners
Before lighting hob burners, make sure
that the flame spreading crowns are po-
sitioned in their seat with the respective
caps.
parallel and centred
tilted
not centred
tilted
Fig. 9:
crown position
The new burners called "Series III" are assem-
bled on certain cooker hobs. The lock system
between cover (B) and flame spreading (A)
guarantees perfect positioning and large
cleaning ability.
Fig. 10:
positioning of the series III burner