Dynex DX-WD1239 Outdoor Cart User Manual


  Open as PDF
of 16
 
14 DX-WD1239
Need help? Call 800-305-2204
Step 9:
Carefully stand your TV cart upright.
Push the rubber sleeves (N) on the metal pins (N), then insert the metal pins into the hole locations of your
choice in the right end (A) and upright (C). Set the adjustable shelf (F) onto the metal pins (M).
Apply the warning label (O) to the top (D). You should be able to read the label when the TV is removed from
your TV cart. When the TV is in place, it should hide the label. Peel off the backing and apply the label as
shown.
Caution: This is a permanent label intended to last for the life of the product. Once applied, do not try to
remove it. You may damage the finish on the top.
You’ll need:
Metal pin
with
rubber
sleeve
95 lbs
(43 kg)
25 lbs
(11 kg)
30 lbs
(13 kg)
Warning: Never use this
furniture with a TV that is too
large or too heavy. Severe
injury or death can occur. The
TV and furniture will be
unstable and may tip.
• The TV must weigh less
than 95 lbs.
• The base of the TV must
be able to sit completely
on this shelf.
N (4)M (4)
 previous next