Dyna-Glo DGP350NP-D Gas Grill User Manual


 

ASSEMBLY INSTRUCTIONS

1. Secure each locking caster (2) to the back side (side that is
beveled for access to locking mechanism when assembled and
upright) of the bottom shelf (1) using four screws (A) four spring
washers (F) ) and four at washers (G). Then tighten all screws.

First, remove the pins (7) from
the cylinder holder (6). Insert the
cylinder holder (6) through the
holes in the bracket pre-attached
to the cart right side panel (5).
Lock in place with the pins (7).
Back Side Beveled
M6x12
S cr e w
6MM
Spring Washer

16 pc
16 pc
2. Install the casters (3) to the front side
(not beveled) of bottom shelf using four
screws (A) four spring washers (F) ) and
four at washers (G). Then tighten all screws.
6
5
7
Cylinder
Holder
Pin
1 pc
2 pc

8
9
6MM
Flat Washer
16 pc
Back Side Beveled