Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
23
NORMAL OPERATION
MAIN BURNER IGNITION
Follow the simple steps listed below to light the Main Burner(s) of your grill:
1) Open the lid and make sure that all burners are in the “OFF” position.
2) Turn main gas supply on.
3) Push in selected MAIN BURNER control knob and turn to “HI”.
4) Push in the electronic ignition button. If ignition does not occur in 5 seconds, turn
the burner control(s) “OFF”, wait 5 minutes and repeat the lighting procedure.
5) Verify selected Main Burner(s) has ignited by visual inspection of a flame.
m WARNING: If ignition still does not occur, turn control knob
OFF and wait 5 minutes before manually lighting the burner
with match. See Match Lighting instructions.
1
1
4
3
5
2
MATCH LIGHTING YOUR GRILL MAIN BURNERS
Follow the simple steps listed below to match light the Main Burner(s) of grill, in the
event ignition fails:
m WARNING: (Make sure that 5 minutes have elapsed since
last attempt of lighting.) Make sure that the lid is in the
full open position any time you attempt to light your grill.
Failure to open the lid could lead to delayed ignition which
may result in serious bodily injury or death, or in a fire or an
explosion causing damage to property.
m WARNING: Do not lean over an open barbecue.
1) Open the lid and make sure that all burners are in the “OFF” position.
m DANGER: Failure to open the lid while igniting the main
burners, or not waiting 5 minutes to allow the gas to clear
may result in an explosive flame-up which can cause bodily
injury or death.
2) Turn main gas supply on.
3) Put match in the match holder and strike match.
4) Push in selected MAIN BURNER control knob and turn to “HI”.
5) Insert match holder and lit match down through cooking grate to ignite the
selected Main Burner. If ignition does not occur in 5 seconds, turn the burner
control(s) “OFF”, wait 5 minutes and repeat the lighting procedure.
m WARNING: If the burner does not light, turn the selected
burner control knob to OFF and wait 5 minutes to let the gas
clear before trying again to light burner(s).
6) Verify selected Main Burner(s) has ignited by visual inspection of a flame.
1
1
4
6
2
1
4
MAIN BURNER
LO
OFF / ARRÊTÉ / APAGADO
HI
MED
1
4
3
MAIN BURNER
LO
OFF / ARRÊTÉ / APAGADO
HI
MED
3
5