Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
27
Inspection of the Spider/Insect Screens
To inspect the Spider/Insect screens:
1. Turn “OFF” gas at source.
2. Remove the cooking grate and the heat distribution plates, exposing the burner
tubes.
3. Remove control knobs
4. Remove the two (2) screws and washers holding each valve to the control panel and
control knob bezel.
5. Loosen the control panel by removing two (2) screws from each side of the front
control panel.
6. Pull control panel away from grill.
7. Remove the four (4) screws that hold the manifold to the
manifold bracket.
ANNUAL MAINTENANCE
ANNUAL MAINTENANCE
(A)
(B)
For Rotisserie Burner tube removal:
Disconnect the rotisserie ignition wire from the ignition module (A).
Remove two screws and nuts on the Rotis-A-Grate
®
(B).
Remove top rear “A” support at the back of grill to get access to Rotisserie
burners screws.
Loosen two screws and nuts that secure rotisserie bracket (C) to remove
the rotisserie burner.