Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
6 www.ducane.com
9. FOR NATURAL AND SYSTEM LP GRILLS. Install the Natural Gas (or
System LP) regulator/hose assembly on to the grills manifold supply pipe. To
make the connection, pull back the outer sleeve of the socket connector, (at
the end of the regulator/hose assembly), and insert all the way the male plug
connection, (on the grills manifold), and then release the outer sleeve of the
socket connector. This will produce a gas joint. After making gas connections,
check all joints for leaks using soapy water and a brush. See Owner’s Guide for
more on Natural Gas (or System LP) installation.
____________________________________________________________________
WARNING: NEVER USE AN OPEN FLAME TO TEST FOR GAS LEAKS.
____________________________________________________________________
10. Assemble the side shelf frame using four (4) #8 x 1 1/2 Phillip’s flat head screws
(a-c). Depending whether your model has one or two side shelves, attach the side
shelf to either or both sides of the burner box, using four (4) 1/4 x 1 1/4
" black
screws, 1/4-20 nuts, and stainless steel shelf support washers (oval, with two
holes). The washers should go on the inside of the burner box with the raised
rib side facing away from the surface of the burner box (d). The nuts go on the
inside of the burner box. Tighten all four nuts securely (e).
Important
WHEN CONNECTING OR
REPLACING ANY GAS PIPE
FITTINGS, ALL JOINTS MUST
BE SEALED WITH A JOINT
COMPOUND (PIPE DOPE)
THAT IS RESISTANT TO THE
ACTION OF (LP) GASES.
9.
10. (a) 10. (b)