Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
Control Panel Operating Guide
Advanced Features of the PowerChef
®
Control Panel
Automatic Power Saver
This feature activates immediately after a pre-programmed
selection is nished cooking and “DONE” is shown on the
display. The cooking system power will immediately shut off
but the display will remain ON.
Safety Power-off
This feature activates if the unit has been accidentally left on
after cooking. Four (4) hours after the last button has been
touched on the control panel the power automatically shuts
off to the entire unit.
Sleep Mode
When using the program mode and the On/Select button
is not pressed after a stage of cooking the power will
automatically reduce to the minimum one bar level after a
short period of time to prevent the food from burning.
Voltage Compensation
The electric grill automatically adjusts the cook times based
on any variance to input voltage. This insures food is grilled
to the desired state.
Key Lock
This feature is useful in preventing accidental changes to
your cooking program by locking the control panel when in
use. When this feature is used all control panel functions
are disabled. To activate the key lock press the numbers in
sequence 1,2,3 LOC will appear on the display screen. To
deactivate the key lock press the numbers in sequence 1,2,3
and ULOC will appear on the display screen.
To Cancel Preheat
Your PowerChef
®
electric grill has an automatic eight (8)
minute PREHEAT function. To cancel the PREHEAT function
press the CANCEL button after the program has started. A
full PREHEAT is recommended when the grill is cold but may
not be required if your grill is still heated from previous use.
1 On/Select
Use to turn on the unit and to conrm the selections,
displayed.
2 Display
Displays selection and status of operation.
3 Off
Push TWICE to shut off the entire grill.
4 Key Pad
Use the keypad to set cook timer when in manual
operation.
5 Power Level
Press up/down arrows to select desired power level.
Use the power level up/down when in manual mode
only.
6 Right/Left Arrows
Use to navigate display selections.
7 Cancel
Cancels the last selection from the display.
5
3 1 7 42
66
1 2 3
4
5
6 7 8
9
0
PAUSE
CANCEL
OFF
Power Level
RL
ON
SELECT
20