Desa GL36STP Outdoor Fireplace User Manual


 
www.desatech.com
55173-F4
11. Keep the area around your fireplace clear of
combustible materials, gasoline and other
flammable vapor and liquids. Do not run fire-
place where these are used or stored. Do not
place items such as clothing or decorations on
or around fireplace.
12. Do not use this fireplace to cook food or burn
paper or other objects.
13. Do not use any solid fuels (wood, coal, paper,
cardboard, etc.) in this fireplace. Use only the
gas type indicated on fireplace nameplate.
14. This appliance, when installed, must be electri
-
cally grounded in accordance with local codes
or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70 or
the Canadian Electrical Code, CSA C22.1
.
15. Do not obstruct the flow of combustion and
ventilation air in any way. Provide adequate
clearances around air openings into the combus
-
tion chamber along with adequate accessibility
clearance for servicing and proper operation.
SAFETY INFORMATION
Continued
16. Do not install fireplace directly on carpeting,
vinyl tile or any combustible material other
than wood. The fireplace must set on a metal
or wood panel extending the full width and
depth of the fireplace.
17. Do not use fireplace if any part has been ex
-
posed to or under water. Immediately call a
qualified service person to arrange for replace
-
ment of the unit.
18. Do not operate fireplace if any log is broken.
19. Do not use a blower insert, heat exchanger
insert or other accessory not approved for use
with this fireplace.
20. Provide adequate clearances around air
openings.
6" O.D.
36
1
/
2
"
42
1
/
2
"
20
1
/
2
"
52
1
/
2
"
24"
21
1
/
4
"
42
1
/
2
"
9
1
/
2
"
19"
4
1
/
2
"
12"
16"
9"
13"
5
1
/
2
"
2
1
/
2
"
6"(152 mm)
15
1
/
4
"
37
1
/
2
"
1
1
/
2
"
8"(203 mm
)
7
1
/
2
"
(2 1/2")
(483 mm)
(114 mm)
(64mm)
(406 mm)
(305 mm)
(330 mm)
(229 mm)
(140 mm)
(953 mm)
(38 mm)
(610 mm)
(927 mm)
(1080 mm)
(1334 mm
)
(521 mm
)
(191 mm)
(64 mm)
(540 mm) (387 mm)
(1080 mm)
(241 mm
)
(152 mm)
SIDE VIEW
FRONT VIEW
TOP
VIEW
DIMENSIONS