DCS BQAR36 Gas Grill User Manual


  Open as PDF
of 2
 
Summer 2008 39
36” Grill Dimensions (with optional grill cart)
Grill Model: BGB36-BQAR
Cart Model: CAD-36
MODEL NUMBER
BGB36-BQAR
TOTAL COOKING AREA 879 SQ. INCHES
PRIMARY COOKING AREA
(GRILL AREA) 638 SQ. INCHES
SECONDARY COOKING AREA
(WARMING RACK) 241 SQ. INCHES
GRILL BURNERS 3 @ 25,000 BTU/HR
INTEGRATED ROTISSERIE BURNER 14,000 BTU/HR
SMOKER BURNER
3,500 BTU/HR
DOUBLE-SIDED GRILL GRATES STAINLESS STEEL
GREASE MANAGEMENT SYSTEM
®
✔
SHIPPING WEIGHT (GRILL HEAD) 284 LBS.
SHIPPING WEIGHT
(OPTIONAL CART) 115 LBS.
SHIPPING DIMENSIONS
(HE
I
GHT X WIDTH X DEPTH)
31” X 40” X 31-1/2”
36” Grill Island Preparation
Grill Model: BGB36-BQAR
Ordering Data:
Please specify gas type (natural or propane) when ordering
Gas Requirements:
Natural
• 1/2" NPT male with a 3/8" flare adapter
• Operational Pressure: 4” W.C.
• Supply Pressure: 6" to 9” W.C.
Propane
• 1/2" NPT male with a 3/8" flare adapter
• LP hose with a quick disconnect & fitting are shipped
connected
• Operational Pressure: 10” W.C.
• Supply Pressure: 11" to 14” W.C.
Power Requirements:
• 120V 60Hz for models with Rotisserie Motor.
Island V
entilation Requir
ements:
It is recommended that adequate ventilation holes must be
provided in the base of an enclosure in the event of a gas leak.
Grill Placement:
DO NOT build grill under overhead unprotected combustible
construction. Use only in well-ventilated areas. These units are
for outdoor use only. If located in a consistently windy area
(oceanfront, mountaintop, etc.) a wind break will be required.
Conversion Kits:
NG to LP and LP to NG conversion kits are available from your
dealer.
Accessories
• Stainless Steel Grill Cart (CAD-36)
• Single or double side burners for built-in application
• Stainless Steel Access Doors for built-in application
• Stainless Steel Access Drawers for built-in application
• Insulated Jacket for built-in application
• Grilling Tool Set
• Brazilian Cherry Chopping Board that fits in cart side-shelf
• Drop-on Griddle Plate
• Vinyl Grill Cover
• Wok and Wok Ring for use on side burners
access doors
(ADN20x36)
a
ccess drawers
(
ADR 36)
Max.
4
” x 4” opening for
g
as supply line
Note: Locate electrical
s
ervice on the right hand
s
ide for rotisserie motor
c
onnection.
3
” to non-combustible
c
onstruction/
min. for lid clearance
12” min. combustible
c
onstruction
BGB36-BQAR
* Standard cut-out dimensions for non-combustible enclosure
** Insulated jacket cut-out dimensions for combustible enclosure
Island installation to use minimum of 3 vents providing
10 square inches per vent (typical).
Vent
V
ent
Vent
We encourage you to find out more about these features and learn how they
can make your cooking experience mor
e enjoyable by visiting our lear
ning
page at: www.dcsappliances.com.
Because of continuing pr
oduct impr
ovement these specifications ar
e subject
to change without notice.
magalog summer 2008.2.qxd 4/24/08 2:05 PM Page 39
 previous