DCS BGA26-BQ Gas Grill User Manual


 
17
TO LIGHT THE GRILL BURNER:
NOTE: Open the grill lid.Turn all knobs to “OFF”.Turn the main gas supply on. If you smell gas, shut
off gas supply and call for service.
Push and hold the igniter button, turn the selected burner knob to “HI”.If burner does not light in
4 to 5 seconds turn knob “OFF”and wait 5 minutes before trying again for any accumulated gas to
dissipate.
MATCH LIGHTING:
If the burner will not light after several attempts then the burner can be match lit. If you’ve just
attempted to light the burner with the igniter, allow 5 minutes for any accumulated gas to dissipate.
Keep your face as far away from the grill as possible and use one of the methods below to light the
grill.
METHOD 1 – Using the match lite clip
NOTE: The clip can be found inside the drip tray.
STEP 1
Use the match lite clip provided inside the drip
pan.
STEP 2
Sandwich the match betwen the coils as shown
in Fig.10.
STEP 3
Light up the match and guide it though the first
or second opening on the radiant (Fig. 11). Then
push and turn the control knob to “HI”.
If the burner does not light in 4 seconds, turn the
knob “OFF”,wait 5 minutes and try again.
METHOD 2 – Using a butane lighter
A butane lighter can be used instead of the match lite
clip. Follow the instructions in STEP 3 above.
LIGHTING INSTRUCTIONS
FIG. 10
FIG. 11
FIG. 12