Dacor OBS36 Gas Grill User Manual


 
14
Connecting the Gas
Gas Connection - Natural Gas
NOTES
Units equipped for use with natural gas ship with a
regulator assembly with 3/4” pipe attached and an
additional 3/4” nipple.
The regulator assembly is also equipped with a 3/4”
to 1/2” reducer on the inlet side.
Connect the factory supplied regulator assembly to
the gas inlet at the back right bottom corner of the
appliance. Make sure the arrow on the regulator points
in the direction of the gas flow (towards the grill).
Connect a 1/2” nipple to the regulator.
Install an approved flexible gas line from the regulator
to the gas line shut off valve.
Gas Connection - Whole House LP Gas
Connect the factory supplied regulator assembly to
the gas inlet at the back right bottom corner of the
appliance. Make sure the arrow on the regulator points
in the direction of the gas flow (towards the grill).
Connect a 1/2” nipple to the regulator.
1.
2.
3.
1.
2.
Installation Instructions
Regulator Assembly


Flexible Gas Line (not included)
Natural Gas
Connection
Whole House LP
Gas Connection
Regulator Assembly


Flexible Gas Line (not included)
Install an approved flexible gas line from the regulator
to the gas line shut off valve.
Gas Connection - LP Gas Cylinder Hose
Connect the supplied 3/4” coupling/nipple to the gas
inlet at the back right bottom corner of the appliance.
Connect the included LP cylinder hose to the nipple.
3.
1.
2.
LP Cylinder Hose Connection

(included) Connect
to Outdoor Grill
LP Regulator and Hose
Assembly (included)
PN 72310 for
OBSB162, OB36, OBS36
PN 101578 for
OB52, OBS52