Cuisinart WM-SW2 Gas Grill User Manual


 
3
INSTRUCTIONS FOR USE
1.
Before using your Cuisinart
Sandwich Grill for the
first time, remove all protective paper and wrapping.
Remove any dust from shipping by wiping the plates
with a damp cloth.
2. Preheat the Sandwich Grill. Close lid and plug cord
into a 120V AC wall outlet. The red light will go on
to signal power. The green indicator light will go on
when unit is ready to use.
Note: The first time you use your Sandwich Grill, it
may have a slight odor and may smoke a bit. T h i s
is normal, and common to appliances with a
nonstick surface.
3. When the green indicator light goes on, place
ingredients on bottom plate according to recipes
provided. Close the lid and lock it.
4. The green light will go off and the red light will once
again illuminate. It may take several seconds for the
red light to come on. This is normal.
5. Once the food is ready to eat, the green light will
come on again.
6. Remove food by gently loosening the edges
with a heat-proof plastic spatula. Never
use metal utensils, as they may damage
the nonstick coating.
7. Always disconnect the plug from the wall
outlet once cooking is completed.
SPECIAL FEATURES
1 . Indicator Lights
- red light illuminates when Sandwich Grill
is plugged in
- green light illuminates when Sandwich Grill
is ready to cook
- green light illuminates again when food
is ready to eat
2 . Lock Down Lid
- lock on handle secures contents while
c o o k i n g
3 . Rubber Feet (not shown)
- will not mark countertop
- keeps unit steady
4 . Nonstick Plates
- wipe clean after use
5 . B r ushed Chrome Housing
6 . C o rd Storage (not shown)
- cord wraps under unit for easy storage
Note: The cooking plates of this Cuisinart
Sandwich Grill have been treated with
a special nonstick coating. Before the
first use, we suggest you season the
grids with cooking spray or oil. If using
oil, apply with a paper towel or pastry
brush. You may find it helpful to repeat
this process before each use of the
SandwichGrill.
2 .
1 .
5 .
3 .
6 .
4 .