Desa Tech EFP33PR Outdoor Fireplace User Manual


 
34
107570
UNVENTED PROPANE/LP GAS FIREPLACE
For more information, visit www.desatech.com
EQUIPMENT SHUTOFF
VALVE - GA5010
For all models. Equipment shutoff valve with
1/8" NPT tap. Fits 1/2" NPT pipe.
BRASS TRIM ACCESSORY
GA7090 (Not Shown)
Optional with built-in installation. Provides a
finished appearance covering rough and/or
unfinished mantel or wall opening, edges, etc.
DUPLEX OUTLET KIT -
GA3555 (Not Shown)
Use for built-in installations when hard wir-
ing your fireplace.
CABINET MANTEL
ACCESSORY WITH
FIREPLACE PERIMETER
BRASS TRIM
GMC11F Series - Walnut
Finished Hardwood Veneer
GMC12U Series - Unfinished
Hardwood Veneer, Ready to
Stain or Paint.
GMC13F Series - Medium
Stained Oak Veneer
Mantel features moldings, fluted sides, and
medallion.
Dimensions (H xW xD): 44" x 57
3
/4" x
22
7
/8"
HEARTH BASE (for Use with
Cabinet Mantel)
GC3333F Series - Walnut
Finished Hardwood Veneer
GC3334U Series - Unfinished
Hardwood Veneer
GC3335F Series - Medium
Stained Oak Veneer
The hearth base creates a handsome riser for
the fireplace .
Dimensions (H xW xD): 6
1
/2" x 58" x 28
9
/16"
CORNER MANTEL
ACCESSORY WITH
FIREPLACE PERIMETER
BRASS TRIM (Not Shown)
GMC36F Series - Walnut
Finished Birch Veneer
GMC37U Series - Unfinished
Birch Veneer, Ready to Stain or
Paint.
Space saving corner mantels feature mold-
ings, fluting and medallion.
Dimensions (H xW xD): 48
3
/4" x 60
7
/8" x
34
3
/4"
ACCESSORIES
Purchase these fireplace accessories from
your local dealer or Parts Dealers list on
page 29. If they can not supply these acces-
sories, call DESA International’s Sales De-
partment at 1-800-458-2472 for referral in-
formation. You can also write to the address
listed on the back page of this manual.
CABINET MANTEL AND BASE
ACCESSORY WITH
FIREPLACE PERIMETER TRIM
(Not Available at All Locations)
GMC8CU Series - Unfinished
Birch Veneer, Ready to Stain or
Paint
GMC9CF Series - Walnut
Stained Birch Veneer
GMC10CF Series - Stained Oak
Veneer
Mantel and base feature moldings, fluted
sides, and medallion.
Mantel Dimensions (H xW xD): 44
3
/4" x
53" x 20
3
/4"
Base Dimensions (H xW xD): 3
3
/4" x 48
1
/4"
x 23
3
/4"
BLOWER ACCESSORY
GA3750 SERIES AND
GA3650T SERIES
Manual variable control and automatic ther-
mostat variable control. A blower will in-
crease air flow to maximize heat distribution.
CLEANING KIT - CCK
(Not Shown)
Your vent-free gas appliance requires regu-
lar cleaning and maintenance to prevent
performance problems. This kit gives you
the tools and instructions to make it easy to
clean all critical areas of your appliance.