Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
-5 -
OPERATING INSTRUCTIONS
Note: Ensure the circuit breakers for the power supply are turned on.
The controls are located behind the grill below front glass and can be accessed by pulling the grill
up from the top, forward and down.
1. ON/OFF Button: Main power and flame effect. The red indicator light will turn on when heater is
on.
2. FLAME: Press this button once for flame effect. The unit will beep and the indicator light will turn
on. The bulbs for flame effect & log set will be on. Pressing button again will turn off the light
function. Keep pressing down this button, the flame/log light will turn from bright to dim.
3. 750W: For low heat function - Press this switch while the ON/OFF switch is in the ON position.
The indicator light will turn on. Pressing button again will turn off the low heat function.
4. 1500W: For high heat function - Press this switch while the ON/OFF switch and the 750W switch
are in the ON position for high heat. The indicator light will turn on. Pressing button again will turn
off the high heat function.
5. Temperature Control: To adjust the temperature to your individual requirements, turn the
temperature control dial to the right (clockwise) to increase the desired temperature and to the left
for lower temperature. This temperature control dial can only be used while the ON/OFF switch and
750W & 1500W switches are in the ON position. When the heater reaches the desired temperature
the heater and 750W/1500W indicator light will turn off and the fan will stop working for air flow.
Note: When the ON/OFF switch is turned OFF, all other heater functions will stop even though the
other switches may be in the ON position.
Main Power On/Off
Press this button for main power. The indicator light will turn on.