Coleman 9995A Series Gas Grill User Manual


 
10
Step 3
Remove Regulators from
Propane Cylinder Connection.
Remove Grease Pans. Slide
out from front of grill to clean or
install new aluminum liners in
Grease Pans.
Step 4
Unlock tab as shown.
Slide out Grease Tray.
Clean thoroughly before storing grill.
Step 5
Slide Grease Tray back into position
under grill and lock tab.
Turn Righthand Burner Valve to
“High.”
Press Igniter Button to light.
NOTE:
If the flame doesn’t imme-
diately light, turn off control knob
and wait five minutes for gas to
clear.
Repeat steps 1 through 3.
If the burner does not light on
second try, turn off knob and
try match-lighting the burner.
Repeat steps 2 and 3 for Lefthand
L.P. gas cylinder and Lefthand Burner.
NOTE: You m
ust
push Igniter Button
to ignite the second side of the grill.
Step 3
All Burner Valves can be adjusted
from “Low” to “High.”
Make sure Burner Valves are in
OFF position.
Allow unit to cool completely.
Turn off fuel supply on both L.P.
gas cylinders.
Step 1
Step 2
Lighting the Grill continued Tear Down/Clean continued
Tear Down/Clean
Match Lighting
Use a LONG wooden match or the match extension provided.
Make sure all burner controls are off except one being lighted.
Insert a match in the holder end of the extension, strike the
match and place the match near the burner from above.
Turn on BURNER CONTROL KNOB while holding match near burner.
You must use another match to ignite the second side of the grill.