Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
17
Assembly Step 8 - Ignitor Installation
1.
2.
3.
2.
Installing the Battery
Unscrew the cap from the ignitor button.
Insert an AA battery (from the hardware pack)
The positive end of the battery faces out.
Place the button spring and cap back onto
the ignitor and thread it back on.
Test the ignitor: Make sure gas is off or
disconnected. Press the ignitor button and
check for a spark in the grill tub and the side
burner.
Using the remaining bolt and nut from
Step 5 (page 14), bolt the hose bracket
to the frame.
Be sure the bolt mounts through the
modesty panel tabs and the frame leg.
Securely tighten the bolt and nut using
a phillips head screwdriver and 7mm
wrench.
1. Locate the loose end of the
ignitor wire. Connect it to the
ignitor electrode underneath the
grill tub, between the two burner
tubes.