Filter
Top Products
Special offers from our partners!
Find Replacement BBQ Parts for 20,308 Models. Repair your BBQ today.
7
8
Attach Firebox Top Assembly to Firebox Bottom Assembly using eight 1/4-20x3/4” hex-head
bolts as shown below.
NOTE: Smoker chamber and firebox doors not pictured for clarity.
TM TM
Diamond Fire Plate Installation - For models without Diamond Fire ignitor accessory,
part number 22504850.
TM
For models that feature the Diamond Fire ignitor accessory, supplemental instructions
are included with ignitor.
First, locate the cover plate in the hardware box. At the bottom right end of the
TM
firebox there is an opening for the Diamond Fire ignitor accessory. Install the
cover plate over the opening using two #8-32x1/2” screws and #8-32 lock nuts.
Second, align the hole pattern on the firebox with the pattern on the
smoker chamber. The firebox should be slightly offset from the smoker
chamber. Attach using six 1/4-20x3/4” hex-head bolts and flat washer
inside firebox and 1/4-20 flange nuts inside smoker chamber.
Firebox Top Assembly
Firebox Bottom Assembly
Firebox
Firebox
Cover Plate