Char-Broil 463270613 Gas Grill User Manual


  Open as PDF
of 28
 
Slide into slots
Back of firebox
Front of firebox
Flame tamers
Pin
14
13
Install flame tamers by sliding one end of each flame tamer into slots at front of firebox and resting opposite end
on pins in back of firebox.
Connect each of the wires from main burner electrodes into the back of Electronic Ignition Module. Total (2)
connections. Connect the two wires [(a) and (b)] from switch wiring harness into the back of the Electronic Ignition
Module. Total (2)connections, shown A. Unscrew the cap and nut from electronic ignition module. Attach
electronic ignition module to cart right side panel with the nut, shown B. Insert AA battery into electronic ignition
module, negative (—) end first. Replace the cap, shown C.
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown
as (a),(b).
2
1
Wire
(a)
(b)
A
Right side panel
ignition module
Electronic
Nut
B
AA Battery
Cap
+
-
C
20
 previous next